www.5929.com

联系方式

地 址:山东省烟台市芝罘区幸福工业园
电 话:13356936635
传 真:13356936635
邮 箱:ogreboy@qq.com

在线留言

企业资讯

您现在的位置:www.5929.com > 资讯中心 > 企业资讯

www.5929.com平台的实际要求

编辑:www.ytgrating.com 发布于:2013-11-19 8:59:58 点击量:

我厂生产的www.5929.com平台的设计制作要求:
Design of steel lattice plate platform, I plant the production requirements:
一、为了防止物体通过平台www.5929.com坠落产生的危险,平台www.5929.com应没有任何大于www.5929.com净空间隙的缺口。平台www.5929.com的净空间隙应不能让直径35mm 的球体通过下落。
The danger, in order to prevent objects from falling through the platform of the steel grid plate, platform steel lattice panels should be no larger than the lattice steel plate net clearance gap. Net space platform steel grid plate should not let 35mm in diameter by falling ball.
二、在有人的地方上面的平台www.5929.com的净空间隙应不能使直径20毫米的球体通过下落,否则应采用其他适当设施保证同等的安全水平。
Two, in the platform steel grid plate one place above the net space shall not make 20 mm diameter sphere by the fall, or other appropriate facilities should be used to ensure an equivalent level of safety.
三、为了要防止坠落的风险,www.5929.com的安装应尽量用焊接的方法固定。www.5929.com按照钢结构平板件进行安装,安装后不能横向移动或脱离支承架,www.5929.com承载扁钢方向两端在支承架上的支承长度每段不得小于25毫米。需要活动和可拆卸的平台www.5929.com,必须用www.5929.com专用的安装夹具固定好。防止该构件的任何移位;安装夹规矩需方要求可有生产厂供应,除不锈钢材料制造的安装夹外,碳钢制作安装夹必须经热镀锌处理,建议安装 夹用螺栓经热镀锌处理,螺栓直径不得小于8mm,每件www.5929.com用安装夹的数量不得少于4只。
Three, in order to prevent falling risk, steel lattice panels should be installed as far as possible by welding fixed. Lattice steel plate according to the steel plate was installed, after installation can not move laterally or from the support bracket, a steel lattice plate bearing bearing length flat directions on the supporting frame of each section shall be not less than 25 mm. Movable and detachable platform steel lattice panels need, must use fixture special steel grid plate fixed. To prevent any shift in the component mounting clamp rules; requirements of the buyer can have production factory supply, in addition to stainless steel mounting clamp, steel fabrication and installation folder must be approved by the hot dip galvanizing processing, recommended to install clip bolt by hot dip galvanizing processing, bolt diameter shall be not less than 8mm, each piece of steel plate with the number of mounting clamp shall be fewer than 4.
四、为了查明任何腐蚀或任何危险的松动或夹紧件位置变化,应随时对附件的紧固状态进行检查。
Four, in order to identify any corrosion or any dangerous loosening or clamping position change, should be tightened to accessories for inspection.
五、复合www.5929.com也是当作平台使用较广的产品之一。
Five, the composite steel plate is as one of the widely used product platform.
我企业拥有专业生产设备,技术最先进,产品最全,质量最好,价格最低的企业。
Our company has a professional production equipment, the most advanced technology, most complete products, the best quality, the lowest price of the enterprise.

  烟台兴辰金属有限企业,一贯秉承"企业发展靠信誉,产品竞争靠质量"的宗旨,把生产高质量的www.5929.com产品作为企业的发展方向和责任。
烟台兴辰金属有限企业网址:/ 欢迎您的光临!

tags:www.5929.com平台的实际要求



版权所有:烟台兴辰金属有限企业 Email:ogreboy@qq.com 鲁ICP备10015215号-1
热销产品:www.5929.com www.5929.com 雨水篦子 地址:山东省烟台市芝罘区幸福工业园 电话:13356936635
技术支撑
点击这里给我发消息
产品咨询
点击这里给我发消息
销售一号
点击这里给我发消息
销售2号
点击这里给我发消息
XML 地图 | Sitemap 地图